Page is loading...
Print Logo Logo


Food, Drug & Device Law Alert - FDA Issues Guidance on Use of Nanotechnology in Foods

The FDA recently issued a final guidance titled, “Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes, Including Emerging Technologies, on the Safety and Regulatory Status of Food Ingredients and Food Contact Substances, including Food Ingredients that are Color Additives.” Although broader in scope, this guidance covers the use of nanotechnology in the manufacture of food ingredients, including color additives and food contact substances, i.e., packaging.

The basic message of this draft guidance is that food or packaging manufacturers who incorporate nanoscale ingredients into their products should be prepared to prove the resulting products are safe and appropriate tests were used to validate their safety. 

The guidance includes a review of the statutory and regulatory provisions governing food, food additives, and food contact substances. Food is considered adulterated if it includes a poisonous or deleterious substance or an unsafe food or color additive. In this context, “unsafe” means “not pre-approved by the FDA” unless the additive is generally recognized as safe (GRAS) by experts in the field. In general, color additives must also be pre-approved and there is no GRAS exception for color additives. The FDA’s approval of food products assumes that they are manufactured according to good manufacturing practices (GMP).

The guidance next describes the FDA’s process for assessing the safety of a food substance. In connection with the manufacturing process, the guidance notes that the manufacturing process can affect the identity of the food, the conditions of its use and the level of impurities it contains. The guidance then states:

As with any other manufacturing technologies applied to food, nanotechnology and other emerging technologies may introduce issues that warrant additional or different evaluation during a safety assessment of a food substance. For example, so-called nano-engineered food substances can have significantly altered bioavailability and may, therefore, raise new safety issues that have not been seen in their traditionally manufactured counterparts. . . . When a food substance is manufactured to include a particle size distribution shifted more fully into the nanometer range, safety assessments should be based on data relevant to the nanometer version of the food substance. Where nano-engineered food substances have new properties, additional or different testing methods may be necessary to determine the safety of the food substance...Thus, as with any studies to support the safety of food substances, studies to establish the safety of food substances manufactured using nanotechnology should have been appropriately validated for these materials.

For food or color additives that have been approved by regulation, foods that have been identified as GRAS, or food contact substances that have been approved via a food contact notification to FDA, when there is a significant change to the manufacturing process, including the incorporation of nanoscale ingredients, the guidance recommends that the manufacturer take several steps:

  • Determine what changes have been made to the food substance, including its physicochemical structure and properties, purity and impurities
  • Conduct a safety assessment for the food substance, including the factors set forth above, bioavailability, and toxicity
  • Consider whether the substance is within a relevant regulation, GRAS determination, or food contact notification
  • Consult with FDA about your conclusions
  • Make a regulatory submission if warranted
The guidance states the FDA’s view that it is unlikely nanotechnology applications in food substances will qualify as GRAS, so formal premarket review and approval will be necessary.

In short, manufacturers of foods, food or color additives, and food contact substances who plan to incorporate nanoscale materials into their products will have to consider conducting safety testing of their products, according to tests that are validated for use with nanoscale materials, and obtain the FDA’s approval prior to marketing the products, or risk FDA enforcement action.

As always, it is important to recall the FDA guidance documents do not have the force of law, but rather simply represent the FDA’s current thinking on a topic.

A pdf copy of the guidance is available here.

For more information, please contact the Barnes & Thornburg LLP attorney with whom you work or one of the following attorneys in the firm’s Food, Drug & Device and Nanotechnology groups: Lynn Tyler at (317) 231-7392 or lynn.tyler@btlaw.com; Hae Park-Suk at (202) 408-6919 or hae.park.suk@btlaw.com; Phil Faccenda at 574-237-1148 or philip.faccenda@btlaw.com; Glenn Killoren at 574-296-2549 or glenn.killoren@btlaw.com; and Todd Vare at 317-231-7735 or todd.vare@btlaw.com.
© 2014 Barnes & Thornburg LLP. All Rights Reserved. This page, and all information on it, is proprietary and the property of Barnes & Thornburg LLP. It may not be reproduced, in any form, without the express written consent of Barnes & Thornburg LLP.

This Barnes & Thornburg LLP publication should not be construed as legal advice or legal opinion on any specific facts or circumstances. The contents are intended for general informational purposes only, and you are urged to consult your own lawyer on any specific legal questions you may have concerning your situation.



Do you want to receive more valuable insights directly in your inbox? Visit our subscription center and let us know what you're interested in learning more about.

View Subscription Center
Trending Connect
We use cookies on this site to enhance your user experience. By clicking any link on this page you are giving your consent for us to use cookies.